Datasheet
LPC11U1X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 2.2 — 11 March 2014 68 of 72
NXP Semiconductors
LPC11U1x
32-bit ARM Cortex-M0 microcontroller
16. Revision history
Table 21. Revision history
Document ID Release date Data sheet status Change notice Supersedes
LPC11U1X v.2.2 20140311 Product data sheet - LPC11U1X v.2.1
Modifications:
• Updated Section 11.1 “Suggested USB interface solutions” for clarity.
• Open-drain I2C-bus and RESET pin descriptions updated for clarity. See Table 3.
LPC11U1X v.2.1 20130924 Product data sheet - LPC11U1X v.2
Modifications:
• Number of CT16B0 match outputs corrected in Figure 1.
• Table 3:
– Added Table note 2 “5 V tolerant pad” to RESET
/PIO0_0.
– Added Table note 4 “For parts with bootloader version 7.0...” .
• Table 8: Removed BOD interrupt level 0.
• Added Section 11.6 “ADC effective input impedance”.
• Programmable glitch filter is enabled by default. See Section 7.6.1.
• Table 6 “Static characteristics” added Pin capacitance section.
• Updated Section 11.1 “Suggested USB interface solutions”.
• Table 5 “Limiting values”:
– Updated V
DD
min and max.
– Updated V
I
conditions.
• Changed title of Figure 28 from “USB interface on a self-powered device” to “USB interface
with soft-connect”.
• Section 10.7 “USB interface” added. Parameter t
EOPR1
and t
EOPR2
renamed to t
EOPR
.
LPC11U1X v.2 20120111 Product data sheet - LPC11U1X v.1
Modifications:
• Number of physical and logical endpoints corrected in Section 7.8.1.
• Use of JTAG updated in Section 2 (for BSDL only).
• Sampling frequency corrected in Table note 7 of Table 7.
• Conditions for parameter T
stg
updated in Table 5.
• Part LPC11U14FHI33/201 added.
• Editorial updates.
• ROM-based integer division routines added (Section 2).
• Use of USB with power profiles specified (Section 7.8).
• Power consumption data added in Section 9.2.
• SSP dynamic characteristics added (Table 16).
• IRC dynamic characteristics added (Table 12).
• Data sheet status changed to Product data sheet.
• Section 13 added.
• Description of pin PIO0_3 updated in Table 3: this pin is not used by the boot loader.
LPC11U1X v.1 20110411 Objective data sheet - -