Datasheet

LPC11E6X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 1.2 — 21 May 2014 77 of 89
NXP Semiconductors
LPC11E6x
32-bit ARM Cortex-M0+ microcontroller
14.8 Pin states in different power modes
[1] Default and programmed pin states are retained in sleep, deep-sleep, and power-down modes.
Table 29. Pin states in different power modes
Pin Active Sleep Deep-sleep/Power-
down
Deep power-down
PIOn_m pins (not
I2C)
As configured in the IOCON
[1]
. Default: internal pull-up
enabled.
Floating.
PIO0_4/PIO0_5
(open-drain
I2C-bus pins)
As configured in the IOCON
[1]
. Floating.
RESET
Reset function enabled. Default: input, internal pull-up
enabled.
Reset function disabled; floating; if the part
is in deep power-down mode, the RESET
pin needs an external pull-up to reduce
power consumption.
PIO0_16/
WAKEUP
As configured in the IOCON
[1]
. WAKEUP function inactive. Wake-up function enabled; can be disabled
by software.