Datasheet

LPC11E3X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 2.3 — 11 September 2014 39 of 71
NXP Semiconductors
LPC11E3x
32-bit ARM Cortex-M0 microcontroller
Conditions: T
amb
= 25 C; Active mode entered executing code while(1){} from flash;
internal pull-up resistors disabled; BOD disabled; all peripherals disabled in the
SYSAHBCLKCTRL register; all peripheral clocks disabled; low-current mode.
(1) System oscillator and system PLL disabled; IRC enabled.
(2) System oscillator and system PLL enabled; IRC disabled.
Fig 9. Typical supply current versus regulator supply voltage V
DD
in active mode
Conditions: V
DD
= 3.3 V; Active mode entered executing code while(1){} from flash; internal
pull-up resistors disabled; BOD disabled; all peripherals disabled in the SYSAHBCLKCTRL
register; all peripheral clocks disabled; low-current mode.
(1) System oscillator and system PLL disabled; IRC enabled.
(2) System oscillator and system PLL enabled; IRC disabled.
Fig 10. Typical supply current versus temperature in Active mode
V
DD
(V)
1.8 3.63.02.4
002aag749
3
6
9
I
DD
(mA)
0
12 MHz
(1)
24 MHz
(2)
36 MHz
(2)
48 MHz
(2)
temperature (°C)
-40 853510 60-15
002aag750
3
6
9
I
DD
(mA)
0
12 MHz
(1)
24 MHz
(2)
36 MHz
(2)
48 MHz
(2)