Datasheet

LPC11E1X All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 1.1 — 24 September 2013 49 of 62
NXP Semiconductors
LPC11E1x
32-bit ARM Cortex-M0 microcontroller
• Connect the external components to the ground plain.
• To keep parasitics and the noise coupled in via the PCB as small as possible, keep
loops as small as possible.
• Choose smaller values of C
x1
and C
x2
if parasitics of the PCB layout increase.
11.3 Standard I/O pad configuration
Figure 27 shows the possible pin modes for standard I/O pins with analog input function:
• Digital output driver
• Digital input: Pull-up enabled/disabled
• Digital input: Pull-down enabled/disabled
• Digital input: Repeater mode enabled/disabled
• Analog input
Fig 27. Standard I/O pad configuration
PIN
V
DD
V
DD
ESD
V
SS
ESD
strong
pull-up
strong
pull-down
V
DD
weak
pull-up
weak
pull-down
open-drain enable
output enable
repeater mode
enable
pull-up enable
pull-down enable
select data
inverter
data output
data input
select glitch
filter
analog input
select analog input
002aaf695
pin configured
as digital output
driver
pin configured
as digital input
pin configured
as analog input
10 ns RC
GLITCH FILTER