Datasheet

LPC11E1X All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 1.1 — 24 September 2013 33 of 62
NXP Semiconductors
LPC11E1x
32-bit ARM Cortex-M0 microcontroller
Conditions: V
DD
= 3.3 V; Active mode entered executing code while(1){} from flash; internal pull-up
resistors disabled; BOD disabled; all peripherals disabled in the SYSAHBCLKCTRL register; all
peripheral clocks disabled; low-current mode.
(1) System oscillator and system PLL disabled; IRC enabled.
(2) System oscillator and system PLL enabled; IRC disabled.
Fig 8. Typical supply current versus regulator supply voltage V
DD
in active mode
Conditions: V
DD
= 3.3 V; Active mode entered executing code while(1){} from flash; internal pull-up
resistors disabled; BOD disabled; all peripherals disabled in the SYSAHBCLKCTRL register; all
peripheral clocks disabled; low-current mode.
(1) System oscillator and system PLL disabled; IRC enabled.
(2) System oscillator and system PLL enabled; IRC disabled.
Fig 9. Typical supply current versus temperature in Active mode
V
DD
(V)
1.8 3.63.02.4
002aag749
3
6
9
I
DD
(mA)
0
12 MHz
(1)
24 MHz
(2)
36 MHz
(2)
48 MHz
(2)
temperature (°C)
-40 853510 60-15
002aag750
3
6
9
I
DD
(mA)
0
12 MHz
(1)
24 MHz
(2)
36 MHz
(2)
48 MHz
(2)