User's Manual
Table Of Contents
- 1. General description
- 2. Features and benefits
- 3. Applications
- 4. Overview
- 5. Marking
- 6. Block diagram
- 7. Pinning information
- 8. Functional description
- 9. Limiting values
- 10. Recommended operating conditions
- 11. Characteristics
- 12. Federal Communication Commission Statement
- 13. Industry Canada statement
- 14. Footprint information for reflow soldering
- 15. Package outline
- 16. Abbreviations
- 17. References
- 18. Legal information
- 19. Tables
- 20. Figures
- 21. Contents
UM11016 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
User manual Rev. 1.0 — 15 June 2016 3 of 24
NXP Semiconductors
UM11016
ZigBee PRO and IEEE802.15.4 JN5169-001-M0x-2 modules
1. General description
The JN5169-001-M0x-2 (with x = 0, 3 or 6) module family provides designers with a
ready-made component that provides a fully integrated solution for applications, using the
IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee
Smart Energy, Home Automation and ZigBee 3.0 and can be quickly and easily included
in product designs. The modules integrate all of the RF components required, removing
the need to perform expensive RF design and test. Products can be designed by simply
connecting sensors and switches to the module IO pins. The module uses NXP’s single
chip IEEE802.15.4 wireless microcontroller, allowing designers to make use of the
extensive chip development support material. Hence, these modules allow designers to
bring wireless applications to market in the minimum time with significantly reduced
development effort and cost.
3 variants are available: JN5169-001-M00-2, JN5169-001-M03-2 and
JN5169-001-M06-2.
The variants available are described in the Table 1
.
1.1 Variants and identifications information
1.2 Regulatory approvals
The JN5169-001-M0x-2 has been tested against the requirements of the following
European standards.
• Radio EN 300 328 v 1.9.1
• EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2
• Basic Safety Assessment (BSA) EN 60950-1:2006
A Notified Body statement of opinion for this standard is available on request.
The High-power module with M06 suffix is not approved for use in Europe.
All module types have received FCC “Modular Approval”, in compliance with CFR 47 FCC
part 15 regulations and in accordance to FCC public notice DA00-1407. The modular
approvals notice and test reports are available on request.
Additionally, all module types have also received ANATEL “Modular Approval”
2. Features and benefits
2.1 Benefits
• Microminiature module solutions
Table 1. Variants and identifications information
Type number Description FCCID IC ID ANATEL ID
JN5169-001-M00-2 Standard power, integrated printed antenna XXMJN5169M0V2 8764A-JN5169M0 <tbd>
JN5169-001-M03-2 Standard power, FL connector XXMJN5169M3V2 8764A-JN5169M3 <tbd>
JN5169-001-M06-2 High power, FL connector XXMJN5169M6V2 8764A-JN5169M6 <tbd>