Datasheet

56F803 Technical Data, Rev. 16
18 Freescale Semiconductor
Absolute maximum ratings given in Table 3-1 are stress ratings only, and functional operation at the
maximum is not guaranteed. Stress beyond these ratings may affect device reliability or cause permanent
damage to the device.
The 56F803 DC/AC electrical specifications are preliminary and are from design simulations. These
specifications may not be fully tested or guaranteed at this early stage of the product life cycle. Finalized
specifications will be published after complete characterization and device qualifications have been
completed.
CAUTION
This device contains protective circuitry to guard against damage due
to high static voltage or electrical fields. However, normal precautions
are advised to avoid application of any voltages higher than maximum
rated voltages to this high-impedance circuit. Reliability of operation is
enhanced if unused inputs are tied to an appropriate voltage level.
Table 3-1 Absolute Maximum Ratings
Characteristic Symbol Min Max Unit
Supply voltage V
DD
V
SS
– 0.3 V
SS
+ 4.0 V
All other input voltages, excluding Analog inputs V
IN
V
SS
– 0.3 V
SS
+ 5.5V V
Voltage difference V
DD
to V
DDA
ΔV
DD
- 0.3 0.3 V
Voltage difference V
SS
to V
SSA
ΔV
SS
- 0.3 0.3 V
Analog inputs ANA0-7 and VREF V
IN
V
SSA
– 0.3 V
DDA
+ 0.3 V
Analog inputs EXTAL and XTAL V
IN
V
SSA
– 0.3 V
SSA
+ 3.0 V
Current drain per pin excluding V
DD
, V
SS
, PWM outputs, TCS,
V
PP
, V
DDA
, V
SSA
I—10mA
Table 3-2 Recommended Operating Conditions
Characteristic Symbol Min Typ Max Unit
Supply voltage, digital V
DD
3.0 3.3 3.6 V
Supply Voltage, analog V
DDA
3.0 3.3 3.6 V
Voltage difference V
DD
to V
DDA
ΔV
DD
-0.1 - 0.1 V