Datasheet

NXP Semiconductors
QSG DAC1x08D+ECP3 DB
Quick Start Guide DAC1x08D + ECP3 demo board
<DOC_ID>
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Quick Start Guide
Rev. 1.1 — 28 July 2010
8 of 17
2.3 NXP DAC1x08D control application:
Using again the CD-ROM delivered by NXP, open now the folder
“SingleBoard_DAC1x08D650_ECP3-35EA”, then the folder “DAC1x08D650_ECP3-35EA
_PC-Software”:
Fig 9. Application software folder
The following files are now accessible:
Fig 10. Application software required files
There is no additional software to install here: double clicking on “Application.exe” will
directly start the application. You can alternatively copy the whole folder on your PC if
you don’t want to keep the CD-ROM.