Datasheet

NXP Semiconductors
QSG DAC1x08D+ECP3 DB
Quick Start Guide DAC1x08D + ECP3 demo board
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in the section 'Legal information'.
© NXP B.V. 2010. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [e-mail]
Date of release: 28 July 2010
Document identifier: <DOC_ID>
8. Contents
1. Introduction ......................................................... 3
1.1
Demoboard overview: ........................................ 3
1.2
Typical demonstration set-up : 1 USB cable =>
1xDAC
................................................................ 4
1.3
Typical demonstration set-up : 2 USB cables,
2xDACs
.............................................................. 4
2. Installing the software tools ............................... 5
2.1
LabView 8.6 Run-time environment: .................. 5
2.2
USB drivers: ....................................................... 5
2.2.1
Step 1: ................................................................ 5
2.2.2
Step 2: ................................................................ 6
2.2.3
Step 3: ................................................................ 7
2.2.4
Step 4: ................................................................ 7
2.3
NXP ADC_Run application: ................................ 8
3.
Demo set-up connection ..................................... 9
3.1 1xDAC Connection diagram: .............................. 9
3.2
1xDAC Jumpers setting: .................................... 9
3.3
1xDAC LED status when powered-up: ............. 10
3.4
2xDACs Connection diagram: .......................... 10
3.5
2xDACs Jumpers setting: ................................. 10
3.6
2xDACs LED status when powered-up: ........... 11
4. NXP_DAC1x08D application user guide .......... 13
4.1
Front panel: ...................................................... 13
4.2 Load the ADC configuration: Erreur ! Signet non
défini.
4.3 Prepare the Data acquisition/analysis: .... Erreur !
Signet non défini.
5.
Using an external clock reference ................... 14
5.1
Configuring the board: ...................................... 14
5.2
New demo set-up: .... Erreur ! Signet non défini.
5.3
Using coherence settings in ADC_Run
application:
............... Erreur ! Signet non défini.
6.
Legal information .............................................. 15
6.1 Definitions ........................................................ 15
6.2
Disclaimers ....................................................... 15
6.3
Licenses ........................................................... 15
6.4
Patents ............................................................. 15
6.5
Trademarks ...................................................... 15
7.
List of figures ..................................................... 16
8. Contents ............................................................. 17