Datasheet

NXP Semiconductors
QSG DAC1x08D+ECP3 DB
Quick Start Guide DAC1x08D + ECP3 demo board
<DOC_ID>
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Quick Start Guide
Rev. 1.1 — 28 July 2010
12 of 17
Once you have connected the 2
nd
USB cable, the LED status is as follows:
Fig 17. LEDs status at power-up
RED LED ON :
Supplies ON
Main USB
green LED ON :
JES204A aligned
green LED blinking @ ~1Hz :
On-board 60Mz oscillator alive
green LED ON :
2xDACs config
Power
USB