Datasheet

NXP Semiconductors

QSG DAC1x08D+ECP3 DB

Quick Start Guide DAC1x08D + ECP3 demo board

<DOC_ID>

All information provided in this document is subject to legal disclaimers.

Quick Start Guide

Rev. 1.1 — 28 July 2010

10 of 17

3.3 1xDAC LED status when powered-up:

Once connected to the PC, and once the USB driver is installed, the LED status should

be as follows:

Fig 13. LEDs status at power-up

3.4 2xDACs Connection diagram:

You are now ready to complete the demo set up connection. Please follow the

connections diagram as defined below:

Fig 14. Demo set-up connection diagram

3.5 2xDACs Jumpers setting:

Looking at the demo board, the jumpers have to be positioned exactly as displayed on

the picture. they configure the board for 2xDACs, clocked by the on-board 60MHz osc.

RED LED ON :

Supplies ON

green LED ON :

JES204A aligned

green LED blinking @ ~1Hz :

On-board 60Mz oscillator alive