Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
Fig 4. Multipoint Connectors we used
One may buy these connectors at any electronic store. Here are some examples [5].
After soldering the connectors connect the boards as shown on the following figures.
Fig 5. LPCXpresso with the Multipoint Connectors
Now the hardware is ready for use. Please connect the LPCXpresso board to the
Blueboard.
Fig 6. Connect the two boards
Be informed that there is the possibility of arranging the boards vice versa. The pictures
below will illustrate how that is meant.
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
7 of 36