Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
Fig 2. Picture of solder bridges
2.1.1 Derivates of the RC663 demo board (Blueboard)
To meet the interests of the market, we also offer Blueboards with a slightly modified
RC663 on it.
The four versions are as follows:
• RC663 Blueboard
This Blueboard with the RC663 offers the full functionality. It supports the modes
described above. In the following text we always relate to the RC663 Blueboard. If
not, this will be indicated by a note.
• SLRC610 Blueboard
This Blueboard with the RC610 works with ISO/IEC 15693 tags only. To use this
Blueboard, one will have to manually change one parameter in the NFC Reader
Library.
In the folder ../intfs/ open the file “phhalHw_Rc663_Reg.h” and scroll to the line
1 #define PHHAL_HW_RC663_CMD_LOADPROTOCOL 0x0DU
It should be around line 641.
Change the value from 0x0DU to 0x03U.
Now, one should be able to use the SLRC610 Blueboard.
• MFRC630 Blueboard
This Blueboard with the MFRC630 works with ISO/IEC 14443A cards only. No
modification in the NFC Reader Library is needed.
• MFRC631 Blueboard
This Blueboard with the MFRC631 works with ISO/IEC 14443A and ISO/IEC 14443B
cards only. No modification in the NFC Reader Library is needed.
If one has one of the limited Blueboards, one will have code in some of the example
projects that will not work with the very board. There is no need to adapt the code for the
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
5 of 36