Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
7.8 Using the Blueboard with the Raspberry Pi
Detailed instructions about how to run the NFC Reader Library on the Raspberry Pi can
be found in the Start Guide linked at the product page of the EXPLORE-NFC [13]
. This
sub chapter only describes some information that is not included in the start guide of the
EXPLORE-NFC.
7.8.1 Preparing the hardware
a. Connector for the Blueboard
b. Connector for the Raspberry Pi
Fig 39. BluePi adaptor
1. Connect the CLEV663B Blueboard to the BluePi adaptor.
2. Connect the adaptor to the Raspberry Pi
3. Connect the USB interface of the Blueboard to the USB interface of the Raspberry
Pi.
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
31 of 36