Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
• ReleaseLPC1769
The build configuration can be selected as follows:
• Click on the project in the project window of the LPCXpresso IDE,
• Right click of the mouse  Select Build Configuration,
• Set active DebugLPC1227 build (or ReleaseLPC1227 build) for LPC 1227.
Fig 35. Select the build configuration
Note: When switching from one MCU to another, please take care to also switch to the
correct MCU setting within the LPCXpresso IDE. See section 7.3
.
7.3 Setting the MCU
There are many LPC microcontrollers supported by the LPCXpresso IDE build in
compiler. Before compiling a project, the correct MCU need to be set.
• Right click the project  choose properties (at the bottom)
• C/C++ build  MCU settings  expand desired LPC1xxx MCU group  choose the
correct microcontroller  click OK
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
27 of 36