Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
6. Other supported hardware by the projects
It’s also possible to use the provided projects with the TUSA Board (Manufacturer:
Silica). This board is a 3d party alternative to the CLEV663B Blueboard. It also uses the
RC663 reader IC.
Fig 31. TUSA Board
To get this board to work with the LPC1227 or LPC1769 controller boards you will have
to do a small hardware modification. Because the TUSA Board gets its power from the
controller board, we need to solder a wire from the Capacitor C28 to the Pin 29 on the
LPCXpresso Board. See figure:
Fig 32. Modification on the LPCXpresso Board
To get a more detailed description of the TUSA Board and the modifications in the
LPCXpresso controller board, please visit the product website at Silica [7]
.
After doing the modifications the hardware is ready and one can put the boards together
like shown on the following figure.
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
23 of 36