Datasheet

NXP Semiconductors

AN11211

Blueboard Quick Startup Guide

5. Associated Projects

All example projects are available for download at the product page of the CLEV663B [8]

in the documents section and are being distributed in one single file.

All projects are packaged into a single installer file. After downloading the zip file please

extract it and run the installer. The installer just copies everything you need to get started

to your hard disk.

Every example project can either run on an LPCXpresso LPC1769 or on an LPCXpresso

LPC1227. Information about how to switch between microcontrollers can be found in

section 7.2 and 7.3.

5.1 Communication with MIFARE Classic

Based on examples this project shows how read-write access can be achieved on this

type of card.

5.2 Polling

Based on examples this project shows how to initiate a basic communication with the

following cards:

• MIFARE Ultralight

• MIFARE Classic

• MIFARE Plus

• MIFARE DESFire

• FeliCa compliant cards

• ISO/IEC 14443-B cards

This example project also looks for cards in range of the RF field in a continuous loop

and returns the type of the detected card or tag to the console window.

5.2.1 General card detection

This project makes use of the built in discovery loop to detect the type of cards inside the

RF field.

5.3 Peer to Peer Initiator

Based on one example the user should get a basic understanding on how to use the P2P

NFC technology.

The P2P example can be configured to act as a server or as a client.

Note: The SNEP – Server cannot be executed on the LPCXpresso LPC1227 because of

its limited RAM.

For a detailed introduction into the P2P functionality please consult the user manual

UM10721 - NXP NFC Reader Library User Manual. It can be downloaded at the web site

of the CLEV663B demo board [8]

Application note

COMPANY PUBLIC

Rev. 1.9 — 1 December 2014

226219

22 of 36