Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
Fig 25. Run the project
Choose the project that contains the user application and click the Debug Button on the
left hand side as shown in the example picture. Make sure, the name of the build
configuration as well as the selected MCU matches the name of the used
microcontroller. See sections 7.2 and 7.3 for further information.
Fig 26. Run the project
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
19 of 36