Datasheet

NXP Semiconductors
AN11211
Blueboard Quick Startup Guide
Fig 24. Importing a project into the LPCXpresso IDE
For a working demo project you need to import at least three sub projects. One
application project (Classic or Polling), the NFC Reader Library and one MCU library
(LPC1227 or LPC1769).
When the import process has finished one can start browsing the code.
Before one can run the project, the LPCXpresso board containing the RC663 Blueboard
needs to be connected to the computer. Wait until the adequate drivers have been
installed.
4.3 Run the project
Before running the project, please ensure that the LPCXpresso with the Blueboard is
connected to the computer. Please also make sure that the correct microcontroller and
the correct build configurations are chosen. Information about how to do this can be
found in the sections 7.2 and 7.3
.
If one is using the projects with the Silica TUSA Board instead of the CLEV663B
Blueboard, please find the needed modifications in the code at section 7.9
.
AN11211 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.9 — 1 December 2014
226219
18 of 36