Datasheet

Product data sheet Rev. 3 — 3 December 2010 14 of 25

NXP Semiconductors

BGA7127

400 MHz to 2700 MHz 0.5 W high linearity silicon amplifier

12.3 2110 MHz to 2170 MHz at 5 V; 180 mA

Table 13. 1930 MHz to 1990 MHz list of components

See Figure 14 and Figure 19 for component layout.

Printed-Circuit Board (PCB): Rogers RO4003C stack; height = 0.508 mm; copper plating thickness = 35

Component Description Value Function Remarks

C1,C4 capacitor 15 pF DC blocking GRM1885C1H150JA01D

C2 capacitor 2.7 pF input match Murata, GRM1885C1H2R7CZ01D

C3 capacitor 1.8 pF output match Murata, GRM1885C1H1R8CZ01D

C5 capacitor 15 pF RF decoupling Murata, GRM1885C1H150JA01D

C6 capacitor 100 nF LF decoupling AVX, 0603YC104KAT2A

C7 capacitor 10 μF LF decoupling AVX, 1206ZG106ZAT2A

J1,J2 RF connector SMA Emerson Network Power, 142-0701-841

J3 DC connector 6 pins MOLEX

L1 inductor 22 nH DC Feed Tyco Electronics, 36501J022JTDG

MSL1 micro stripline 1.14 mm × 0.8 mm × 10.95 mm input match Width (W) × Spacing (S) × Length (L)

MSL2 micro stripline 1.14 mm × 0.8 mm × 11.4 mm input match Width (W) × Spacing (S) × Length (L)

MSL3 micro stripline 1.14 mm × 0.8 mm × 5.9 mm output match Width (W) × Spacing (S) × Length (L)

MSL4 micro stripline 1.14 mm × 0.8 mm × 1.4 mm output match Width (W) × Spacing (S) × Length (L)

MSL5 micro stripline 1.14 mm × 0.8 mm × 4.6 mm output match Width (W) × Spacing (S) × Length (L)

MSL6 micro stripline 1.14 mm × 0.8 mm × 10.95 mm output match Width (W) × Spacing (S) × Length (L)

R1 resistor 1 Ω Yageo, RC0603FR-071RL

R2 resistor 2 kΩ trimmer bias adjustment Bourns, 3214W-1-202E

See Table 14 for a list of components.

PCB board specification:

Rogers RO4003C; height = 0.508 mm; ε

= 3.38; copper thickness = 35 μm.

Fig 20. 2110 MHz to 2170 MHz application schematic

ICQ_ADJ

SHDN

enable

MSL1 MSL2 MSL5MSL4

RF_IN

BGA7127

50 Ω 50 Ω

001aam04

MSL3

CC(BIAS)

CC(RF)