Datasheet
NXP Semiconductors
Quick start ADC1415S, ADC1215S, ADC1115S, ADC1015S series (F1 or
Quick start
1.3 Power supply
Th
e board is powered either with a 3 V
adaptor.
Table 1. Power supply
Name Function
J8 2.1 Jack connector – 5VDC
Change ST9 and ST10 position accordingly
J10 +3V green connector –
Power supply 3 V
J11
Change ST9 and ST10 position accordingly
CMOS version
+1.8V green connector –
Power supply 1.8 V
LVDS DDR version
+3V green connector –
Power supply 1.8 V
TP1 GND test point
TP2 GND test point
1.4
Input signals (IN, CLK)
The input clock signal c
To ensure a good evaluation of the device, the input signal and the input clock must be
synchronized together.
Moreover, the input frequency (Fi, MHz) and the clock frequency (Fclk, Msps) should
follow the form
ula:
, where M is an odd number of period and N is the number of samples.
Quick start ADC1415S, ADC1215S, ADC1115S, ADC1015S series (F1 or
Rev. 5 — January 2011
e board is powered either with a 3 V
DC
and 1.8/3 V
DC
power supplies or a 5V DC
View
Change ST9 and ST10 position accordingly
Power supply 3 V
DC
Change ST9 and ST10 position accordingly
Power supply 1.8 V
DC
Power supply 1.8 V
DC
Input signals (IN, CLK)
The input clock signal c
an be either a sine wave or a LVCMOS signal.
To ensure a good evaluation of the device, the input signal and the input clock must be
synchronized together.
Moreover, the input frequency (Fi, MHz) and the clock frequency (Fclk, Msps) should
ula:
, where M is an odd number of period and N is the number of samples.
J10 / J11
TP2
ST9/10
Quick start ADC1415S, ADC1215S, ADC1115S, ADC1015S series (F1 or
F2 versions)
Quick start
© NXP B.V. 2011. All rights reserved.© NXP B.V. 2011. All rights reserved.
5 of 28
power supplies or a 5V DC
an be either a sine wave or a LVCMOS signal.
To ensure a good evaluation of the device, the input signal and the input clock must be
Moreover, the input frequency (Fi, MHz) and the clock frequency (Fclk, Msps) should
, where M is an odd number of period and N is the number of samples.
J8
TP1
ST9/10