Datasheet

NXP Semiconductors
Quick start ADC1415S, ADC1215S, ADC1115S, ADC1015S series (F1
or F2 versions)
Quick start
© NXP B.V. 2011. All rights reserved.
Quick start Rev. 5 — January 2011 17 of 28
3.3.2 ADC SPI programming Read Registers page
This page can be used to read all registers by clicking on the “Read all registers” button and will
display the result in the table below:
Fig 10. SW_ADC_1_r02: “ADC - Read Registers” page
When all registers have been read, it is possible to save the data to a text file. The settings are
saved in a table-like format as shown below:
Table 6. Typical saving on text file
Content of file is shown as table format
Column 1 Column 2
Address Value
05 00
06 01
08 00
10 03
11 00
12 09
13 00
14 00
15 00
16 00
17 00