Datasheet

NXP Semiconductors

Quick start ADC1415S, ADC1215S, ADC1115S, ADC1015S series (F1

or F2 versions)

Quick start

Quick start Rev. 5 — January 2011 14 of 28

3.3 ADC Software tool

Run the application “SW_ADC_1_r02.exe”. This application will allow:

• the user to control features on our high speed ADC through the SPI interface available on any

ADC1415S, ADC1215S, ADC1115S, ADC1015S series;

• As well as performing any online data acquisition to evaluate the performances of the

ADC1415S, ADC1215S, ADC1115S, ADC1015S series.

At start-up, the program will detect any board connected to your system and display information as

can be seen on following window:

Fig 7. SW_ADC_1_r02: start-up screen

: “NXP Banner Button” will display your default internet browser to the NXP data converter home

page;

: “REFRESH” allows you to poll your system for any hardware change. It will reset any board

connected to your system;

: “QUIT” allows you quit the application;

: “INITIALIZATION” allow you to initialize the HSDC-EXTMOD board prior to any acquisition task.

In the example above, the HSDC-EXTMOD has been detected, as well as ADC1115S125.

At this moment, make sure that 4 LEDs are visible on the HSDC-EXTMOD (2 close to power plug,

1 for USB and 1 close to FPGA).

The “Info” page gives more details on the current hardware configuration for the HSDC-EXTMOD

board:







