Datasheet

NXP Semiconductors Quick start ADC1412D, ADC1212D, ADC1112D series
Quick start
QS_ADC1412D_10.doc
©
NXP B.V.
2010
. All rights reserved.
Quick start Rev. 10 — 17 December 2010 16 of 27
Column 1 Column 2
15 00
16 00
17 00
20 0e
21 00
22 00
Note that all data are saved in hexadecimal format.
Click on the “Save registers read to file” button to select the file to store data to. Make
sure that you store your file with “.txt” extension, this will allow you to re-use the file on
the “ADC - Load Registers” page.
3.3.3 ADC SPI programming Compare Registers page
This page can be used to compare the registers value from the 2 channels:
Fig 12. SW_ADC_1_r02: “ADC - Read Registers” page
To do the comparison, follow the procedure below:
• Select the first and last register to be compared in the “Selection range” field;
• Click on “Compare registers” button, this will show the values of all registers in
the field of comparison for both ADC A and B.
Click on the “Save registers read to file” button to save the result of the comparison. The
format of the text file is equivalent to the previous section and is given below: