Datasheet

NXP Semiconductors Quick start ADC1412D, ADC1212D, ADC1112D series
Quick start
QS_ADC1412D_10.doc
©
NXP B.V.
2010
. All rights reserved.
Quick start Rev. 10 — 17 December 2010 15 of 27
Perform any settings and then click on the “Send data to device” button to update the
device registers.
3.3.2 ADC SPI programming Read Registers page
This page can be used to read all registers by clicking on the “Read all registers” button
and will display the result in the table below:
Fig 11. SW_ADC_1_r02: “ADC - Read Registers” page
When all registers have been read, it is possible to save the data to a text file. The
settings are saved in a table-like format as shown below:
Table 5. Typical saving on text file
Content of file is shown as table format
Column 1 Column 2
Address Value
3 ff
5 00
6 01
8 00
11 00
12 08
13 00
14 00