Datasheet
74HC_HCT4067 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 5 — 13 December 2011 8 of 30
NXP Semiconductors
74HC4067; 74HCT4067
16-channel analog multiplexer/demultiplexer
[1] To avoid drawing V
CC
current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal Z, no V
CC
current will flow out of terminals Yn. In this case there is
no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed V
CC
or GND.
[2] For DIP24 package: P
tot
derates linearly with 12 mW/K above 70 C.
[3] For SO24 package: P
tot
derates linearly with 8 mW/K above 70 C.
[4] For SSOP24 and TSSOP24 packages: P
tot
derates linearly with 5.5 mW/K above 60 C.
[5] For DHVQFN24 package: P
tot
derates linearly with 4.5 mW/K above 60 C.
9. Recommended operating conditions
P
tot
total power dissipation T
amb
= 40 C to +125 C
DIP24 package
[2]
-750mW
SO24 package
[3]
-500mW
SSOP24 package
[4]
-500mW
TSSOP24 package
[4]
-500mW
DHVQFN24 package
[5]
-500mW
P power dissipation per switch - 100 mW
Table 4. Limiting values
…continued
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
74HC4067
V
CC
supply voltage 2.0 5.0 10.0 V
V
I
input voltage GND - V
CC
V
V
SW
switch voltage GND - V
CC
V
t/V input transition rise and fall rate V
CC
= 2.0 V - - 625 ns
V
CC
= 4.5 V - 1.67 139 ns
V
CC
=6.0V - - 83 ns
V
CC
= 10.0 V - - 31 ns
T
amb
ambient temperature 40 +25 +125 C
74HCT4067
V
CC
supply voltage 4.5 5.0 5.5 V
V
I
input voltage GND - V
CC
V
V
SW
switch voltage GND - V
CC
V
t/V input transition rise and fall rate V
CC
= 4.5 V - 1.67 139 ns
T
amb
ambient temperature 40 +25 +125 C