User Manual

JN5148 High-Power USB Dongle (DR1131)
Reference Manual
JN-RM-2064 v1.0 © NXP Laboratories UK 2012 9
4.4 Installing Device Driver for USB Dongle
1. The first time you plug the dongle into a USB port of your PC, an ‘Installing
driver’ message appears in the bottom-right corner of the screen. The
system will install most of the software required, but will leave the following
box:
2. Close the box and go to Start > Control Panel > System > Device
Manager. In the Device Manager, you will notice that the VCOM port is
accompanied by an exclamation mark:
3. Right-click on the VCOM port and from the context menu select 'Update
driver software..' and then select the manual installation method (bottom
option).
4. Use the Update Driver Software browser to navigate down to the folder
C:\Jennic\Tools\NXP_USBDongle\Drivers and then click Next.
The system will now install the software driver.