User Manual

Jennic
JennicJennic
Jennic
84 JN-DS-JN5139 v1.5 © Jennic 2008
Disclaimers
The contents of this document are subject to change without notice. Jennic reserves the right to make changes,
without notice, in the products, including circuits and/or software, described or contained herein in order to improve
design and/or performance. Information contained in this document regarding device applications and the like is
intended through suggestion only and may be superseded by updates. It is your responsibility to ensure that your
application meets with your specifications.
Jennic warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with Jennic’s standard warranty. Testing and other quality control techniques are used to the extent
Jennic deems necessary to support this warranty. Except where mandatory by government requirements, testing of
all parameters of each product is not necessarily performed.
Jennic assumes no responsibility or liability for the use of any of these products, conveys no license or title under any
patent, copyright, or mask work right to these products, and makes no representations or warranties that these
products are free from patent, copyright, or mask work infringement, unless otherwise specified.
Jennic products are not intended for use in life support systems, appliances or systems where malfunction of these
products can reasonably be expected to result in personal injury, death or severe property or environmental damage.
Jennic customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Jennic for any damages resulting from such use.
All trademarks are the property of their respective owners.
Version Control
Version Notes
1.0 22
rd
December 2006 - First Release
1.1 9th February 2007 – Added solder reflow profile
1.2 16th July 2007 – uplifted to Preliminary status, typical specification updates, internal reset modifications
1.3 31st July 2007 – updates to DC current consumptions
1.4 26th October 2007 – updated applications information, added PCB decal including paddle details
1.5 23rd April 2008 – Product has now been fully characterised