User Manual

Jennic

JennicJennic

Jennic

Appendix C

Related Documents

[1]

IEEE Std 802.15.4-2003 IEEE Standard for Information technology – Part 15.4 Wireless Medium Access Control

(MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)

[2]

JN-AN-1003 Boot Loader Operation

[3]

JN-AN-1062 Using OTP eFuse Memory

[4]

JN-AN-1038 Programming Flash devices not supported by the JN51xx ROM-based bootloader

RoHS Compliance

JN5139 devices meet the requirements of Directive 2002/95/EC of the European Parliament and of the

Council on the Restriction of Hazardous Substance (RoHS).

Status Information

The status of this Data Sheet is

Production

Jennic products progress according to the following format:

Advanced

The Data Sheet shows the specification of a product in planning or in development.

The functionality and electrical performance specifications are target values and may be used as a guide to the final

specification. Integrated circuits are identified with an R suffix, for example JN5139-Z01R.

Jennic reserves the right to make changes to the product specification at anytime without notice.

Preliminary

The Data Sheet shows the specification of a product that is in production, but is not yet fully qualified.

The functionality of the product is final. The electrical performance specifications are target values and may used as a

guide to the final specification. Integrated circuits are identified with an R suffix, for example JN5139-Z01R.

Jennic reserves the right to make changes to the product specification at anytime without notice.

Production

This is the final Data Sheet for the product; all product characterization is completed.

All functional and electrical performance specifications where included, including min and max values are final.

This Data Sheet supersedes all previous document versions.

Jennic reserves the right to make changes to the product specification at anytime to improve its performance.