User Manual

Jennic
JennicJennic
Jennic
50 JN-DS-JN5139 v1.5 © Jennic 2008
17 Electrical Characteristics
17.1 Maximum ratings
Exceeding these conditions may result in damage to the device.
Parameter Min Max
Device supply voltage VDD1, VDD2 -0.3V 3.6V
Supply voltage at voltage regulator bypass pins
VB_xxx
-0.3V 1.98V
Voltage on analogue pins XTALOUT, XTALIN,
VCOTUNE, RFP, RFM,
-0.3V VB_xxx + 0.3V
Voltage on analogue pins VREF, ADC1-4, DAC1-2,
COMP1M, COMP1P, COMP2M, COMP2P, IBIAS,
-0.3V VDD1 + 0.3V
Voltage on 5v tolerant digital pins SPICLK,
SPIMOSI, SPIMISO, SPISEL0, DIO0-DIO8, DIO11-
DIO20, RESETN
-0.3V Lower of (VDD2 + 2V)
and 5.5V
Voltage on 3v tolerant digital pins DIO9, DIO10 -0.3V VDD2 + 0.3V
Storage temperature -40ºC 150ºC
Reflow soldering temperature according to
IPC/JEDEC J-STD-020C
260ºC
Human Body Model
1
2.0kV
Machine Model
2
200V
ESD rating
Charged Device Model
3
500V
1) Testing for Human Body Model discharge is performed as specified in JEDEC Standard JESD22-A114.
2) Testing for Machine Model discharge is performed as specified in JEDEC Standard JESD11-A115.
3) Testing for Charged Device Model discharge is performed as specified in JEDEC Standard JESD22-C101.
17.2 DC Electrical Characteristics
17.2.1 Operating Conditions
Supply Min Max
VDD1, VDD2 2.2V 3.6V
Ambient temperature range -40ºC 85ºC