Data Sheet

Jennic

A.8 Industry Canada Statement

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.

These modules have been designed to operate with antennas having a maximum gain of 4.4 dBi. Antennas having a

gain greater than 4.4 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

The following table shows the approved list of antennas:

Brand Model Number Description Gain

Antenna Factor ANT-2.4-CW-RCL Knuckle Antenna 2.9 dBi

Antenna Factor ANT-2.4-CW-RCT-RP Knuckle Antenna 2.2 dBi

Centurion WCR2400-SMRP Knuckle Antenna 1.0 dBi

Centurion WRR2400-SMRP Knuckle Antenna 1.3 dBi

Nearson S131CL-L-PX-2450S Knuckle Antenna 2.0 dBi

Nearson S141AH-2450 Knuckle Antenna 2.0 dBi

Nearson S152CL-L-PX-2450S Knuckle Antenna 4.0 dBi

Hyperlink Technologies HG2402RD-RSF Knuckle Antenna 2.2 dBi

As long as the above condition is met, further transmitter testing will not be required. However, the OEM integrator is

still responsible for testing their end-product for any additional compliance requirements required with this module

installed (for example, digital device emissions, PC peripheral requirements, etc).

A.8.1 Industry Canada End Product Labelling

For Industry Canada purposes the following should be used.

“Contains Industry Canada ID IC: 7438A-CYO5139M0, IC: 7438A-CYO5139M4 or IC: 7438A-CYO5139M6” to reflect

the version of the module being used inside the product.

A.9 RoHS Compliance

JN5139-xxx-Myy devices meet the requirements of Directive 2002/95/EC of the European Parliament and of the

Council on the Restriction of Hazardous Substance (RoHS).

The JN5139-xxx-M00, M03 and M04 modules are fully compliant with the Chinese RoHS requirements SJ/T11363-

2006.

Further information can be found on the Jennic support website at www.jennic.com/support