Manual

10
Tighten the limb screw with the hex included
and secure the limb with assembled limb
and press pads.
Screw on the quiver guide underneath the
stirrup.
Turn the stirrup lengthways. Remember that
the crossbow is still upside down.
Secure the stirrup by tightening the screws
using the hex.
Do not turn the screws too tightly as this
may damage the limbs.
MOUNTING ASSEMBLING THE ACCESSORIES
Push the quiver through the quiver guide.
Turn the lever to secure the quiver.
Push the sight on to the picatinny rail on top of the trigger housing and tighten the screws included
with a screwdriver.
Ensure that the sight is secured well.