User Manual

nxgtechnology.com
7
Troubleshooting:
noituloS melborP
No power
Check that the power is switched on at the wall.
Check if the power cord is properly connected to the power outlet.
No sound
Check that the volume control is NOT at minimum setting.
Check that it is NOT set to mute.
No soundfrom Bluetooth
connection
Check if you have properly paired with the source - pairing code 0000
If none of the above solutions work, then switch off and unplug your Speaker system, leaving it for 2
minutes and then switching it back on again.
Remote won't work
Inspect or replace the batteries.
Make sure there are no obstacles obscuring the front of the Speaker.
Technical Specifications:
peeD ”4.2 x hgiH ”8.4 x ediW ”9.13 eziS
)W02+W02( sttaw 04 rewop tuptuO
Standby power consumption <1W
Vm008 ytivitisnes tupnI
S/N (A weight)
Frequency Response 60Hz~20KHz
L/R separation (1khz) 40dB
L/R balance (stereo) 1.5dB
zHM801-5.78 MF
*Specifications are subject to change without prior notice.
60dB