V1 NX-SHELF-1 / NX-SHELF-2 Single and Double shelves INSTRUCTION MANUAL NX-SHELF 2 (pictured) CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
Congratulations on the purchase of your new TV Mount. At NXG Technology we design our products to be simple to use, durable, & furnctional. Like all NXG products, our mount line has evolved from hours of rigorous testing by our engineers and customers and were designed to provide you with years of enjoyment. Please take a moment to review the installation instructions to ensure that you get the most from your new mount. support@nxgtechnology.
PRODUCT PARTS Product Parts D B Contents C A E Quantity Quantity Single Shelf Double Shelf (NX-SHELF-1) (NX-SHELF-2) Description A 1 1 Wall Plate B 1 1 Wall Plate Cover C 1 2 Glass shelf D 2 2 End Cap E 1 2 F 1 2 Left Shelf Support Right Shelf Support F HARDWARE PART NUMBERS A1 1 Wall Screw 2- NX-SHELF-1 3- NX-SHELF-2 A2 A3 A4 A5 A6 Plastic Washer Allen Wrench 2.
like to mount the shelf CONCRETE DRILL BIT NOT INCLUDED (2 ¾”) 70mm STEP 1b – Position the wall plate at the desired height and mark the top & bottom mounting points. STEP 1c – Using a 1/8” bit, drill pilot holes in both (all 3) locations (for concrete walls use 5/16” drill bit).
STEP 1d – Attach the wall plate using two wall screws (top and bottom only) NOTE: CONCRETE WALL INSTALLATION •Insert wall anchors into concrete wall (part 2 ) STEP 1e – Adjust the bottom of the wall plate until it’s level before full tightening the bottom screw Bubble Level Tighten bottom screw once wall plate is level.
STEP 2- ATTACH SHELF SUPPORTS Single Shelf (Shelf Support Attachment Locations) Shelf support s can be installed in any one of these three locations to accommodate the height of the equipment Glass shelf shown for visual. ONLY Attach Shelf Supports at this step. Shelf positions are evenly spaced 4.7” (120cm) apart. A1 M5 X 8mm F E Double Shelf (Shelf Support Attachment Locations) Shelf supports can be installed in any two of these four locations to accommodate the height of our equipment.
STEP 2B – SOLID CONCRETE INSTALLATION Level Solid Concrete Drill pilot hole STEP 2B – DRILL PILOT HOLES AND MOUNT WALL PLATE Wall Anchors Wall Screws X2 X3 Single Shelf Double Shelf 2 1 P7
Attach Glass Shelf Insert Rubber Shelf bumpers A2 A3 A4 A5 M5 Button Head Screw Plastic Washer 2- Single Shelf 4- Double Shelf 2- Single Shelf 4- Double Shelf Allen Wrench 2.
End Caps Slide End Cap on top and bottom of Wall Plate and Wall Plate Cover D D Cable Management P9
Modular Design Multi-Unit Adapter included to assist in linking multiple shelf systems. A6 Single Shelf shown Multi-Unit Adapter to align (link) multiple shelf systems. Wall Plate design allows for additional shelves to be added when needed. Multi-Unit Adapter presses into Wall Plate allowing additional units to be linked without the need to level. 3- Single Shelf products linked 2- Single Shelf products linked CAUTION!! Multi-Unit adapter for alignment only.
ADDDENDUM- PRODUCT DIMENSIONS AND SPECIFICATIONS NX-SHELF 1 NX-SHELF 2 60 lbs MW60C44 P11
WARRANTY INFORMATION Manufacturer warrants this product against defects in material or workmanship for the original purchaser of the product with the following conditions: WARRANTY PERIOD: "The three-Year Limited Manufacturer’s Warranty” covers this product against defects in materials or workmanship from the date of purchase by the original consumer for a period of three (3) years for parts and labor.
