Owner's manual

NX-RM505 Operating Manual
Table of Contents
1. Introduction 3
2. Batteries 5
A. Battery Installation
B. Battery Life
3. Summary of Operations 6
A. Description of Devices
B. Pre-programmed Codes
C. Learning From Other Remote Controls
D. Macro Operations
E. Favorite Channel Buttons
F. Punch Through Operations
G. Editing LCD Text
H. Cloning the NX-RM505
I. All Other Operations
J. LCD Screen And Button Layout
K. System Settings
4. Programming the NX-RM505 to Control Your Components 12
A. Using Pre-programmed Codes
1. Three-Digit Code Number
2. Auto Scan With Three-Digit Number
B. Learning Method
1. Programming the Function Buttons
2. Programming the Ten Device Buttons
5. Programming Favorite Channels 24
6. Programming Macro Buttons 26
A. Programming Macro Functions
To M1, M2, M3,
POWER and SYSTEM OFF Buttons
B. Programming Macro Functions
To The Ten Device Buttons
7. Programming Punch Through Functions 32
8. Erasing Existing Programming 34
A. Erasing Learned Buttons
B. Erasing Favorite Channel Buttons
NX-RM505
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 2