NX-PRO6820CE 6 1/2˝ Two-Way Commercial or Residential Ceiling Speaker with ABS Composite Rear Enclosure 16648 North 94th Street • Scottsdale, AZ 85260 1-800-733-0008 www.nxgtech.
NX-PRO6820CE 6 1/2˝ Two-Way Commercial or Residential Ceiling Speaker with ABS Composite Rear Enclosure Congratulations on choosing NXG 61/2˝ Two-Way Commercial or Residential In-Ceiling Loudspeakers with ABS Composite Rear Enclosure. Like all NXG products, great care has been taken in their design. Their combination of advanced engineering and state-ofthe-art materials will provide you with years of listening pleasure, while blending smoothly into your installation decor.
Adjustable Tilt-Swivel Tweeter Island (Figs. 5A and 5B) The tweeter island in the NX-PRO6820CE ceiling speaker can be directed toward the listening area, allowing you to tailor the speaker’s dispersion pattern to better fit the desired listening area. The overall smoothest response is achieved with the tweeter island facing straight out; however, you may find the sound more pleasing by aiming the tweeters toward a particular listening position.
New Construction NX-PRO6820CE Specifications 1. Determine speaker locations and mark them on your plans for future reference. Maximum Power Handling: 5 - 120 watts [40 watts (transformer limited) in 70 volt mode] 2. If possible, run speaker wires after HVAC and electrical wiring is in place. Sensitivity: 90dB @ 1 watt/1 meter 3. Secure speaker wires in place along the run with insulated staples only and be careful not to pierce the wire’s insulation.
