V1 NX-MOUNT-TLT-M / NX-MOUNT-TLT-L Medium & Large Tilt Mount INSTRUCTION MANUAL CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
Congratulations on the purchase of your new TV Mount. At NXG Technology we design our products to be simple to use, durable, & furnctional. Like all NXG products, our mount line has evolved from hours of rigorous testing by our engineers and customers and were designed to provide you with years of enjoyment. Please take a moment to review the installation instructions to ensure that you get the most from your new mount. support@nxgtechnology.
HARDWARE PART NUMBERS 1 M4 x 12 X4 2 M5 x 12 X4 3 M6 x 15 X4 4 M8 x 15 X4 5 M4 x 25 X4 9 10 11 SQUARE WASHER X4 5mm SPACER X8 Lag Bolts X4 6 M5 x 25 X4 7 M6 x 25 X4 12 CONCRETE ANCHOR X4 8 M8 x 25 X4 13 STEEL WASHER X4 PRODUCT COMPONENT PARTS Universal Adapter Range (W x H) Minimum: 100mm x 100mm (Medium and Large) Maximum: 430mm x 400mm (Medium) Maximum: 660mm x 400mm (Large) Bubble Level B B A C C Product Components Qty Description Contents A B C 1 2 1 Wall Plate Vertical Rai
STEP 1- ATTACH VERTICAL RAILS TO BACK OF FLAT PANEL Hardware 1, 2, 3, & 4 to be used with panels when back of panel is flat with no obstructions.
STEP 2- EXPAND WALL PLATE TO OPEN POSITION Hold top and bottom horizontal rails and open wall plate.
STEP 3- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO 4) Find stud, mark edge and drill pilot holes in center locations . LEVEL WALL PLATE WITH INCLUDED BUBBLE LEVEL AND MARK HOLES FOR DRILL BIT PILOT HOLE (2 1/3”) 60mm STEP 3 A & B – LOCATE WOOD STUDS AND DRILL PILOT HOLES Mark center of wood using stud finder and pencil, use wall plate to level and mark pilot holes.
STEP 4 C – MOUNT WALL PLATE TO WALL 16” STUD (Medium Fixed Mount) 16” or 24” STUD (Large Fixed Mount) 13 13 11 11 X4 P7
STEP 4 – SOLID CONCRETE INSTALLATION Use wall plate to mark mounting locations/ drill pilot holes Level Solid Concrete Drill Bit Drill Pilot Hole DRILL BIT NOT INCLUDED STEP 4 A & B – POSITION WALL PLATE, MARK, & DRILL PILOT HOLES Position wall plate to desired location, level, and mark pilot locations with pencil.
STEP 4 C – MOUNT WALL PLATE TO WALL 13 12 13 11 11 X4 P9
STEP 5A- ATTACH PANELTO WALL PLATE & ADJUST TILT ANGLE Hang vertical rails with flat panel attached Vertical Rails Flat Panel Wall Plate Heavy, Assistance Required Pull spring lock cord down and gently push bottom of panel to wall and release spring lock. Panel is now locked on to wall plate.
ADDDENDUM- PRODUCT DIMENSIONS AND SPECIFICATIONS NX-MOUNT-TLT-M NX-MOUNT-TLT-L P11
WARRANTY INFORMATION Manufacturer warrants this product against defects in material or workmanship for the original purchaser of the product with the following conditions: WARRANTY PERIOD: "The three-Year Limited Manufacturer’s Warranty” covers this product against defects in materials or workmanship from the date of purchase by the original consumer for a period of three (3) years for parts and labor.
