V1 NX-MOUNT-ART-S Small Full Motion Mount INSTRUCTION MANUAL CAUTION: DO NOT EXCEED MAXIMUM LISTED CAPACITY.
Congratulations on the purchase of your new TV Mount. At NXG Technology we design our products to be simple to use, durable, & furnctional. Like all NXG products, our mount line has evolved from hours of rigorous testing by our engineers and customers and were designed to provide you with years of enjoyment. Please take a moment to review the installation instructions to ensure that you get the most from your new mount. support@nxgtechnology.
HARDWARE PART NUMBERS 1 2 3 4 M4 x 12 X4 M5 x 12 X4 M6 x 12 X4 M5 x 20 X4 5 ADAPTER HARDWARE 6 6 mm x 65 mm WALL SCREWS X2 ANCHOR X2 A1 A2 ADAPTER SCREWS X4 M8M5 ADAPTER X4 A4 A3 ALLEN WRENCH X1 FIXED WRENCH X1 PRODUCT COMPONENT PARTS B A B C Product Components Contents A B C Qty Description 1 Wall Plate/ Arm Assembly 1 VESA Monitor Plate 4 Monitor Adapters P3
PRODUCT DIMENSIONS AND SPECIFICATIONS 60 lbs MW60C44 P4
STEP 1- REMOVE VESA MONITOR PLATE FROM MOUNT ASSEMBLY Separate adapter from mount B VESA MONITOR PLATE Remove and save Phillips head screw. Screw will be used to reattach VESA Monitor Plate in Step 4.
STEP 2- BACK FLAT PANEL (VESA MONITOR PLATE) Connect VESA monitor plate to flat panel Use M8M5 adapter screw 2 A2 with 5mmx 12mm or 5mm x 20mm screw if flat 4 panel has 8mm inserts.
STEP 3A- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 3B) Find stud and mark edge and center locations STEP 3A– DRILL PILOT HOLE AND MOUNT WALL PLATE Mount wall plate Wood Stud 5 6 mm WALL SCREW The wall screws should be tightened to the wall with socket wrench 5 6 mm WALL SCREW X2 P7
STEP 3B – SOLID CONCRETE INSTALLATION Drill pilot hole Solid Concrete Drill bit size/ pilot hole depth DRILL BIT NOT INCLUDED STEP 3B- DRILL PILOT HOLE AND MOUNT WALL PLATE 5 6 mm WALL SCREW 6 ANCHOR The wall screws should be tightened to the wall with socket wrench 5 6 mm WALL SCREW P8
STEP 4- ATTACH PANEL TO MOUNT Hang with monitor attached Locking mechanism Heavy, Assistance Required Secure VESA Monitor Plate to mount with Phillips screw from Step 1. Do not over-tighten screw. STEP 5- LEVEL AND ADJUST TILT Adjust tilt and elbow points A3 A4 Flat panel can be leveled (+/- 3 degrees) as needed. If Philips screw is tensioned too tight it will be difficult to adjust leveling.
WARRANTY INFORMATION Manufacturer warrants this product against defects in material or workmanship for the original purchaser of the product with the following conditions: WARRANTY PERIOD: "The three-Year Limited Manufacturer’s Warranty” covers this product against defects in materials or workmanship from the date of purchase by the original consumer for a period of three (3) years for parts and labor.
