V1 NX-MOUNT-ART-M Medium Full Motion Mount INSTRUCTION MANUAL CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
Congratulations on the purchase of your new TV Mount. At NXG Technology we design our products to be simple to use, durable, & furnctional. Like all NXG products, our mount line has evolved from hours of rigorous testing by our engineers and customers and were designed to provide you with years of enjoyment. Please take a moment to review the installation instructions to ensure that you get the most from your new mount. support@nxgtechnology.
HARDWARE PART NUMBERS 1 M4 x 15 X4 2 M5 x 15 X4 3 M6 x 15 X4 4 M8 x 15 X4 5 M4 x 25 X4 9 10 11 SQUARE WASHER X4 5mm SPACER X8 8 mm LAG BOLTS X2 6 M5 x 25 X4 12 7 M6 x 25 X4 8 M8 x 25 X4 13 14 STEEL WASHER X2 M6 x 12 ADAPTERS SCREWS X8 ANCHOR X2 PRODUCT COMPONENT PARTS B A C D Product Components Contents A B C D Qty 1 1 2 2 Description Wall Plate VESA Monitor Plate Monitor Adapters-1 Monitor Adapters-2 P3
PRODUCT DIMENSIONS AND SPECIFICATIONS 60 lbs MW60C44 P4
STEP 1- REMOVE VESA MONITOR PLATE FROM MOUNT Remove and save Philips head screw and washer. Screw and washer will be used to reattach VESA Monitor Plate in Step 3. VESA MONITOR PLATE and ADAPTERS Use diagrams to determine which mounting configuration is needed to attach VESA Monitor Plate (with or without adapters) to the back of flat panel. Please check flat panel wall mounting compatibility before proceeding with installation.
STEP 2- MONITOR ADAPTER ATTACHMENT TO VESA PLATE Connect VESA monitor plate with adapters to flat panel 1 2 3 4 B STEP 2- MONITOR ADAPTER ATTACHMENT TO VESA PLATE Connect VESA monitor plate with adapters to flat panel Adapters to be used with panels that have the following VESA mounting inserts (mm) (WxH); 300x200, 300x300, 300x400, 400x200, 400x300, & 400x400.
STEP 2- CURVED BACK FLAT PANEL Connect VESA monitor plate to flat panel B 5 6 7 8 10 5mm spacers to be used when back of panel is curved or when more clearance is required. Spacers can be stacked 5mm + 5mm between panel and VESA Monitor Plate or Adapters to allow for maximum of 10mm clearance.
STEP 3A- WOOD STUD (CONCRETE INSTALLATION SKIP TO STEP 3B) Find stud and mark edge and center locations (2 ¾”) 70m m STEP 3A – DRILL PILOT HOLE AND MOUNT WALL PLATE Mount wall plate Wood Stud 11 13 8 mm LAG BOLT STEEL WASHER X2 P8
STEP 3B – SOLID CONCRETE INSTALLATION Level Drill pilot hole Solid Concrete DRILL BIT NOT INCLUDED (3/8”) 10 mm STEP 3B – DRILL PILOT HOLE AND MOUNT WALL PLATE 12 ANCHOR 11 13 8 mm LAG BOLT Steel WASHER P9
STEP 4 - ATTACH PANEL TO MOUNT Hang with monitor attached Heavy, Assistance Required STEP 4 - SECURE MONITOR PLATE TO ARM ASSEMBLY, LEVEL, AND TILT Locking mechanism Secure Monitor Plate to Arm using 2 philips screws and Cross screwdriver . Tighten only to snug tension. Flat panel can be leveled (+/- 3 degrees) as needed. If security screws are tensioned tight it will be difficult to adjust leveling. Rotate Ratchet Handle clockwise to tension tilt mechanism.
WARRANTY INFORMATION Manufacturer warrants this product against defects in material or workmanship for the original purchaser of the product with the following conditions: WARRANTY PERIOD: "The three-Year Limited Manufacturer’s Warranty” covers this product against defects in materials or workmanship from the date of purchase by the original consumer for a period of three (3) years for parts and labor.
