High Bandwidth Innovative-Interconnect Solutions Design Through Manufacture of High-Performance-Interconnect Systems, Connectors & Cable Assemblies NX | Mini-SAS | QSFP+ | SFP+ Solving Interconnect Problems Quickly Since 1966 HIGH BANDWIDTH TM
4X & 12X Direct Attach Wiring Diagram Plug 1 Plug 2 S1 S16 S2 S15 S3 S14 S4 S13 S5 S12 S6 S11 S7 S10 S8 S9 S9 S8 S10 S7 S11 S6 S12 S5 S13 S4 S14 S3 S15 S2 S16 S1 S2 S1 S16 888-MERITEC ( 637-4832 ) Meritec’s Direct Attach 4X (SFF-8470) Direct Attach UL Listed Materials & RoHS Compliant Wafer-Based Design See page 7 for more configurations [14.2] .56 [ 8.7] .34 [ 14.3] .56 [ 9.7] .38 [ 8.7] .34 S15 P1 S2 S1 [ 7.0] .28 M2.5 Thumbscrew [ 46.6] 1.84 [ 24.7] .97 [ 42.8] 1.
www.meritec.com Meritec’s 12X (SFF-8470) Direct Attach UL Listed Materials & RoHS Compliant See page 7 for more configurations S2 S1 S48 P1 Wiring Diagram Plug 1 Plug 2 S1 S48 S2 S47 S3 S46 S4 S45 S5 S44 S6 S43 S7 S42 S8 S41 S9 S40 S10 S39 S11 S38 S12 S37 Wiring Diagram Plug 1 Plug 2 S13 S36 S14 S35 S15 S34 S16 S33 S17 S32 S18 S31 S19 S30 S20 S29 S21 S28 S22 S27 S23 S26 S24 S25 [14.7] .58 [ 8.7] .34 [ 14.3] .
888-MERITEC ( 637-4832 ) Meritec High Performance 4X (SFF-8470) Cable Assemblies Performance 4X (SFF-8470) Cable Assemblies DataMeritec Rate High – Wire Gauge vs. Performance Over Length Data Rate – Wire Gauge vs. Performance Over Length Length, Meters - Length, > 0.5Meters 1 - >1.50.5 21 30 AWG IB SDR 2.5 Gbps IB DDR* IB QDR 5.0 Gbps CX4 10.0 Gbps 1.5 2.5 2 3 2.5 3.53 3.5 4 44.5 4.5 5.5 5 5 5.5 66 6.56.5 7 8 77.5 7.5 8.58 9 8.
|12X 4X Assembly www.meritec.com Description 7 3 A 2 4 7 5 D 1 10.0 Connector 1 (left) 6 = 4X 7 = 12X (Not Available in Z Axis or angled configuration) Cable Egress 1 = Straight 2 = Angled 3 = Z Axis 4 = Belly to Belly Connector 2 (right) 6 = 4X 7 = 12X (Not available in Z Axis or angled configuration) Connector 1 (left) Orientation (See “Mech.
|12X 4X Mechanical 888-MERITEC ( 637-4832 ) Orientation Left End Mechanical Orientation Letters Right End Any available “Left End” can be paired with any available “Right End” Short Side Dn 4X/12X Straight Cable Egress A B Straight Cable Egress 4X/12X Short Side Up S1 Short Side Up S1 4X/12X Straight Cable Egress C D Straight Cable Egress 4X/12X S1 S1 Short Side Dn Note: Not Available with Printed Direct Attach (PDA) option S1 Short Side Dn 4X Angled Cable Egress E F Angled Cabl
HBW HyBrids + Options www.meritec.
NX+ 888-MERITEC ( 637-4832 ) Receptacles New! Panel-Mount Receptacle-Cable Termination RoHS Compliant Consult factory. Board Receptacle & Feed-Through Mounts Available Feed-Thru Pinout P1 P2 S1 S16 S2 S15 S3 S14 S4 S13 S5 S12 S6 S11 S7 S10 S8 S9 S9 S8 S10 S7 S11 S6 S12 S5 S13 S4 S14 S3 S15 S2 S16 S1 4-Lane Feed-Thru Connector 1.550 .600 1.330 (.030) (.035) .281 .417 .775 .575 1.000 P1 2X 4-40 UNC .17 Meritec’s Feed-Thru Connectors are RoHS Compliant 4X 4-40 UNC P2 .
www.meritec.
+ + SFP & QSFP SFF-8436, SFF-8470 888-MERITEC ( 637-4832 ) SFF-8431, SFF8432 SFP+ Passive Copper-Cable Assemblies are RoHS Compliant Wiring Diagram P1 End P2 End SFP+ Note: Tolerance of ± 40.0 mm for lengths of 0.5M to 1.0M consult factory for lengths less than 0.5M. Chart Suffix A= B= C= D= Wire Gauge (AWG) 24 26 28 30 Length in Meters at 10 Gb/s 7 5 3 1 Tolerance at Maximum Length ± 70.0 mm ± 70.0 mm ± 70.0 mm ± 70.
www.meritec.com QSFP+ Features & Benefits Passive Copper-Cable Assemblies are RoHS Compliant • Enhanced EMI shielding for low emissions • Ultra low crosstalk for enhanced performance • Mates with all standard SFP+/QSFP interfaces • Lower cost alternative to fiber optics • RoHS Compliant & EEPROM Programmable Cable Specifications • Supports/Exceeds 40 Gb/s Ethernet • • • • IEEE802.
HIGH BANDWIDTH TM Visit us online! Innovative-Interconnect Solutions 1359 West Jackson Street • Painesville, Ohio 44077 USA 440-354-2100 • Fax: 440-354-5692 • 800-860-9014 • 888-MERITEC (637-4832) www.meritec.com • E-mail: info@meritec.com www.moldtech.com & www.connectorsunlimited.
