QSFP+

Z Axis Cable Egress
Mechanical Orientation Letters
Left End Right End
Any available “Left End” can be paired with any available “Right End”
Inner edge of the backshell at the latch. See line drawing for details.
Note: Not Available with Printed Direct Attach (PDA) option
A B
C D
E F
G H
I J
K L
Z-Axis Cable Egress Z-Axis Cable Egress
Z-Axis Cable Egress Z-Axis Cable Egress
S T
Y Z
W X
M
P
Cable Assembly Nominal Length
Note: The broken line view is from the rear of
the backshell and the solid line view is
from the mating face of the connector.
Tolerance: <1Meter, +/– 40mm; 1 through 10 Meter, +/– 70mm; >10 Meter, +/– 100mm
S1
Short Side Dn
4X/12X
Straight Cable Egress Straight Cable Egress
4X/12X
Short Side Up
S1
Short Side Up
S1
4X/12X
Straight Cable Egress Straight Cable Egress
4X/12X
S1
Short Side Dn
S1
Short Side Dn
4X
4X
4X
4X
Short Side Up
S1
S1
Short Side Up Short Side Dn
S1
Angled Cable Egress
Angled Cable Egress
Angled Cable Egress
Angled Cable Egress
4X
4X
Short Side Up
S1
Short Side Dn
S1
Angled Cable Egress
Angled Cable Egress
4X
4X
Angled Cable Egress
S1
Short Side Dn
Angled Cable Egress
S1
Short Side Up
Short Side UpShort Side Dn
Short Side UpShort Side Dn
4X 4X
4X 4X
N
O
Cable Egress Cable Egress
No Termination No Termination
Outer Jacket Strip Outer Jacket Strip
Custom/Other Conn.Custom/Other Conn.
4X
|
12 X
Mechanical
Orientation
6
High Bandwidth NX | Mini-SAS | OSFP+ | SFP+
www.meritec.com
888-MERITEC
(
637-4832
)