- NX series User's Manual POWER SUPPLY

Control keypad
65(86)
7
Functions in the System menu
Code Function Min Max Unit Default Cust Selections
S6.1 Application selection
Basic
Application
Basic Application
Standard Application
Local/Remote control Appl.
Multi-Step Application
PID Control Application
Multi-Purpose Control Appl.
Pump and Fan Control
Appl.
S6.2 Language selection English
English
Deutsch
Suomi
Svenska
Italiano
S6.3.1 Password Not used
0
=Not used
P6.3.2 Parameter lock
Change
Enabled
Change Enabled
Change Disabled
P6.3.3
Internal brake
resistor
Connected
Not connected
Connected
P6.3.4 Fan control Continuous
Continuous
Temperature
P6.3.5 Multimonitoring page
Change
enabled
Change enabled
Change disabled
P6.3.6
HMI acknowledg.
timeout
200 5000 ms 200
P6.3.7
HMI number of
retries
110 5
P6.4.1 Default page
P6.4.2
Default page/
Operating menu
P6.4.3 Timeout time 0 65535 s 30
P6.4.4 Contrast 031 18
P6.4.5 Backlight time Always 65535 min 10
S6.5.1 Load up to keypad All parameters
S6.5.2
Load down from
keypad
All parameters
Application parameters
S6.5.3 Parameter sets
Store set 1
Load set 1
Store set 2
Load set 2
Load factory defaults
P6.5.4 Parameter backup No
Yes
No
S6.6
Parameter
comparison
I6.7.1 Info: Unit power
I6.7.2 Info: Unit voltage V
I6.7.3
Info:
Software version
I6.7.4
Info:
Firmware interface
S6.7.5
Info:
Expander boards
D6.7.6.1.1
Info: Applications:
Application ID
D6.7.6.1.2
Info: Applications:
Version