Tus neeg siv phau ntawv

TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
There is no sound coming from my R.A.M. SYSTEM
2000.
Make sure the ´MUTE´ button is not pressed.
The audio from my R.A.M. SYSTEM 2000 seems less
open than the audio directly from my DAW.
Double check that you have not accidentally pressed the
´MONO´ button.
Even with the volume knob all the way up it doesn´t seem
to output as much as before.
You may have the ´DIM´ button pushed, reducing the
output by -20dB.
There is no signal present at the R.A.M. SYSTEM 2000´s
Output.
Verify that you have correctly connected the Input and
Output cables.
Upon turning on the R.A.M. SYSTEM 2000 there is no
sound.
This is normal as it starts in MUTE. Just turn the volume
knob to activate.
Is it possible to have both outputs or both inputs active at
the same time?
No, you can only use one Input and one Output at any
given time.
Can I use a stereo subwoofer?
No, there is only one subwoofer output. Subwoofer use is
generally in MONO, not Stereo.
I want to use a new mobile device with the Bluetooth Input
but it is not recognised.
Push the BT RESET button after connecting a new
Bluetooth mobile device.
12
* For any further doubts or questions please get in contact with us at: [e-mail]!