User's Manual

NVIDIA CONTROL PANEL

Pairing with the Buttons
1. Press and Relase the button on the Hub
The light on the hub will start alternating between green and cyan
2. Press and hold the button on the glasses until the light next to
the button blinks green
Holding the button on the glasses until it blinks green, and then
releasing the button, places the glasses into their pairing mode.
3. Light on the glasses will turn solid green, and hub will return to
solid green
Pairing is usually a very quick operation and the light on the
glasses will turn solid green when paired. If a stereo application is
running the glasses will start operating as well.
Note: Adding glasses with the button also adds the glasses to the
control panel. If you wish to pair many glasses at once, press the
button on the hub twice, then pair the glasses. Glasses paired
this way will not appear in the control panel but will operate.
press and release