User's Manual


NVIDIA 3D VISION USER GUIDE

Pairing Glasses to the Hub
You can pair the glasses to the hub through the control panel or with
just the buttons on the hub and glasses. Either version of pairing can
be done while stereo applications are runing or not. You can add pair
additional glasses without distrupting already paired glasses.
Pairing with the Control Panel
1. Open the 3D Vision Pro Control Panel
Navigate to the 3D Vision Pro control panel entry in the NVIDIA
control panel
2. Press the Add Glasses Button
3. Press and hold the button on the glasses until the light next to
the button blinks green
Holding the button on the glasses until it blinks green, and then
releasing the button, places the glasses into their pairing mode.
You can pair multiple glasses at one time.
4. Glasses name and battery level appear and glasses start to
operate
Pairing is usually a very quick operation and the light on the
glasses will turn solid green when paired. If a stereo application is
running the glasses will start operating as well.