User's Manual

OEM Instruction Manual Content
Consistent with §2.909(a), the following text must be included within the user’s manual or
operator instruction guide for the final commercial product. OEM-specific content is displayed in
bold-italics.
Operating Requirements and Conditions:
The design of (Product Name) complies with U.S. Federal Communications Commission (FCC)
guidelines respecting safety levels of radio frequency (RF) exposure for (OEM manufacturer to
insert device classification: Mobile or Portable) devices.
FCC ID:
This product contains FCC ID: (Include FCCID of the Module)
Note: In the case where the Host / Module combination has been re-certified the FCCID shall
appear in the product manual as follows:
FCC ID: (Include Standalone FCC ID)
Mobile Device RF Exposure Statement (If Applicable):
RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Only those antennas with same type and lesser/equal gain filed under this FCC ID number can
be used with this device.
Portable Device RF Exposure Statement (If Applicable):
RF Exposure - This device has been tested for compliance with FCC RF exposure limits in a
portable configuration. At least (Insert Required Separation Distance from RF Exposure
Evaluation) cm of separation distance between the (Product Name) device and the user's body
must be maintained at all times. This device must not be used with any other antenna or
transmitter that has not been approved to operate in conjunction with this device.
Caution Statement for Modifications:
CAUTION: Any changes or modifications not expressly approved by (Company Name) could
void the user’s authority to operate the equipment.
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End Product):
Note: This equipment has been tested and found to comply with the limits for a (OEM to insert
device type: Class A or Class B) digital device, pursuant to Part 15 of the FCC Rules.
OEM must follow Part 15 guidelines (§15.105 and §15.19) to determine additional statements
required in this section for their device class.