User's Manual
Health and Safety 
50 
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the safety labels 
included on the equipment. 
Symbols on Equipment 
This symbol in conjunction with any of the following symbols indicates the presence of a 
potential hazard. The potential for injury exists if warnings are not observed. Consult your 
documentation for specific details. 
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer 
all servicing to qualified personnel. 
! 
WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. 
Refer all maintenance, upgrades, and servicing to qualified personnel. 
This symbol indicates the presence of electric shock hazards. The area contains no user or field 
serviceable parts. Do not open for any reason. 
General Precautions 
To reduce the risk of electric shock, personal injury, or damage to the equipment, observe the following 
precautions: 
  Follow all cautions and instructions marked on the equipment. 
  Do not bend, drop, crush, puncture, incinerate, or push objects into openings of the gaming console. 
  Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an 
e
lectrical storm. 
  Do not use Tegra NOTE 7 in rain or near sink or other wet locations. Take care not to spill any food or liquid 
into the console. In case Tegra NOTE 7 gets wet, unplug all cables and turn off before cleaning, and allow it to 
dry thoroughly before turning it on again. 
Do not expose Tegra NOTE 7 to any gas that is not normally contained in the atmosphere, as it may cause 
defects. 
  Never turn on any equipment when there is evidence of fire, water, or structural damage. 
  Place the product away from radiators, heat registers, stoves, amplifiers, or other appliances that produce 
heat. 
  Never force a connector into a port. Check for obstructions on the port. If the connector and port don’t join 
with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you 
have positioned the connector correctly in relation to the port 
  If you use an AC Power Adapter to charge the gaming console, make sure the power adapter is fully assembled 
before you plug it into a power outlet. Then insert the AC Power Adapter firmly into the power outlet. Do not 
connect or disconnect the AC Power Adapter with wet hands. 
  Operate the AC adapter in a ventilated area. 
  When you are using the Tegra NOTE 7 or charging the battery, it is normal for the system and/or AC power 
adapter to get warm. 
  Do not use conductive tools that could bridge live parts 
  Do not make mechanical or electrical modifications to the equipment. 










