User's Manual

Jetson TK1 Pro Hardware Architecture
The Jetson TK1 Pro board architecture is depicted on Figure below. The modular architecture allows
maximum flexibility and custom configurations.
Figure 5: Jetson TK1 Pro Hardware Architecture
It is important to highlight the use of SMSC’s 9514 in order to simplify the connection to the Jetson TK1
Pro Platform. With this approach only a USB connection is needed (via J4) in order to have a serial
console, network connectivity to the board (i.e. NFS drive mounting, etc.) and reflashing of the system.
Boot up
Step 1, Connect the touch panel to the P1860 main platform. The miniDP cable should plug into the VCM
DP port. Main platform side:
Figure 6