User's Manual

“Host PC USB (Console)” port is labeled J4 on Figure 1. The USB connection enables debug and
development capabilities. Please refer to the.CHM documentation file for more details on how to
configure this capability.
Ethernet Connection (J1000): While the Ethernet port connection is optional – and may require
further configuration not covered on this document – to gain network access, an Ethernet cable can be
connected to the port labeled J1000 on Figure 1.
EBB Board (P1892) Minimum Connections
Error! Reference source not found. shows all the EBB board component with labels. Please be aware
that some connectors - while accessible on the side of the board - their labels are not visible as are
placed on the other side of the EBB board. Please refer to Figure 3 for details on these connectors.
Bottom:
Top:
Figure 3: EBB board with Component Labels