User's Manual

Top:
Figure 1: Mainboard with Component Labels
The following connections need to be made on the main board (P1860) as a minimum in order to boot
Jetson TK1 Pro for the first time:
Power Supply (J14): Power supply can be connected to the connector labeled J14 as shown on Error!
Reference source not found..
mDP Connector (J9): Using the mDP cable provided, the board needs to be connected to the Touch
Screen Display included in the package.
Main Board (P1860) Optional Connections
The following connections are not required for the board to boot.
USB Mouse and Keyboard (J2&J3): While this is optional, is highly recommended that a USB mouse
and keyboard are plugged-in in to the platform via the main board J2 connector.
HDMI Connector (J8):
This is only required if the Touch Screen provided with the platform will not be
used.
USB Connection (J35): The USB cable provided with the Jetson TK1 Pro platform while is not required
to boot it is recommended to be connected to mini-USB connector labeled “Host PC USB (Console)” on
the Jetson TK1 Pro board and to a USB 2.0 port on the workstation running Ubuntu Linux 12.04. The